Ignition Off Timeout (Id=1282); Trip Continuous Distance Counting (Id=1283); Geofencing; Frame Border (Id=1020) - Teltonika FM1010 User Manual

0 255
 Ignition Off Timeout (ID=1282)
This parameter represents timeout to wait if ignition is off in order to detect TRIP STOP and
generate event.
Minimum Maximum
value value
0 65535
 Trip Continuous distance counting (ID=1283)
For this feature I/O#11 ODOMETER must be enabled. If I/O ODOMETER is enabled, and
Continuous distance counting variable is set to Continuous (value 1), TRIP distance is going to be
counted continuously (from TRIP start to TRIP stop) and shown as I/O ODOMETER value.
Minimum Maximum
value value
0 1
 Geofencing
In this chapter it is explained how to get all parameters for the first Geofence zone (all ID
numbers are for the 1st zone). And at the end of the chapter (part 8.6.10) is presented a table
with the IDs of all the rest Geofence zones.
8.6..1

Frame border (ID=1020)

Geofence border thickness, measured in meters.
Minimum Maximum
value value
0 1000000
8.6..2

Geofence Zone #1 Shape (ID=1030)

Geofence shape parameter can be: circle – value 0; rectangle – value 1.
Minimum Maximum
value value
0 1
8.6..3

Geofence Zone #1 Priority (ID=1031)

Parameter defines Geofence priority: 0 is low, 1 – high, 2 – panic;
Minimum Maximum
value value
-
Recommended Goes with (depends on)
value
-
Recommended Goes with (depends on)
value
- I/O#11 – Odometer (ID = 1410-
Recommended
value
1000
Recommended Goes with (depends on)
value
-
All Geofencing parameters
Recommended Goes with (depends on)
value
Trip (ID=1280)
parameters
Trip (ID=1280)
parameters
Trip (ID=1280)
1415)
Goes with (depends on)
parameters
All Geofencing parameters
parameters
parameters
U8
Value
type
U16
Value
type
U8
Value
type
U32
Value
type
U8
Value
type
61