Teltonika FMB1YX User Manual page 93

Property Name Size,
Bytes
Tachograph driver
card presence
Driver 1 states
Driver 2 states
0x08 – webasto
0x20 – car closed by factory's remote control
0x40 – factory-installed alarm system is actuated (is
in panic mode)
0x80 – factory-installed alarm system is emulated
by module
Byte2:
0x01 – parking activated (automatic gearbox)
0x10 – handbrake is actuated (information available
only with ignition on)
0x20 – footbrake is actuated (information available
only with ignition on)
0x40 – engine is working (information available
only when the ignition on)
0x80 – revers is on
Byte3:
0x01 – Front left door opened
0x02 – Front right door opened
0x04 – Rear left door opened
0x08 – Rear right door opened
0x10 – engine cover opened
0x20 – trunk door opened
Byte4:
0x01 – car was closed by the factory's remote
control
0x02 – car was opened by the factory's remote
control
0x03 – trunk cover was opened by the factory's
remote control
0x04 – module has sent a rearming signal
0x05 – car was closed three times by the factory's
remote control
- High nibble (mask 0xF0 bit)
0x80 – CAN module goes to sleep mode
1 0x00 – No driver card
0x01 – Driver1 card presence
0x02 – Driver2 card presence
0x03 – Driver1 and driver2 cards present
1 0xX0 – break/rest
0xX1 – availability
1
0xX2 – work
0xX3 – driving
0x0X – no time-related warning detected
0x1X – limit #1: 15 min before 4 1/2 h
0x2X – limit #2: 4 1/2 h reached (continuous driving time
exceeded)
0x3X – limit #3: 15 minutes before optional warning 1
0x4X – limit #4: optional warning 1 reached
Value bitmasks
93