Main Buttons Description; Keyword Sms (Gprs) Commands; Keyword Configuration With Tcp; Status Info - Teltonika FMB1YX User Manual

5.1.1

Main Buttons description:

'Connect to device' (Figure 9) – connects device.
'Load from device – loads configuration from device.
'Save to device' – save configuration to device.
'Load from file' – load configuration from file.
'Save to file' – save configuration to file.
'Update firmware' – update firmware on device.
'Reset device' – reset device configuration to default.
5.1.2

Keyword SMS (GPRS) commands:

"setkey <oldkeyword> <newkeyword>" - Set new or change the keyword. Configuration
should be not locked. Example:
New keyword (set):
<name>{space}<pass>{space}setkey{space}{space}<newkeyword>
Change keyword (change):
<name>{space}<pass>{space}setkey{space}<oldkeyword>{space}<newkeyword>
"delkey <keyword>" - Deletes current keyword. Configuration keyword should be
configured and not locked.
Example:
<name>{space}<pass>{space}delkey{space}<keyword>
5.1.3

Keyword configuration with TCP

If configuration has keyword, it will be saved to configuration file.
After TCP configuration: if keyword in configuration file does not match keyword in device,
configurator will ask which keyword must be used for device.
If device is locked, keyword cannot be changed with TCP configuration.
5.2

Status info

Status info monitoring FMB1YX real time information in 5 different positions: Device info,
GNSS info, GSM info, OBD/ CAN adapter info and I/O info. All this information can be saved into
.HTML format with a button whitch is in device info table top right corner.
In device info user can see device name, firmware version, last device start time, RTC Time,
power voltage (mV), device IMEI, SD card free space, Device uptime, Battery voltage (mV) and
internal battery status.
In GNSS info user can see:
 Real time GNSS status information: module status (ON, deep/GPS/Online sleep mode),
how much GNSS packets device got from startup, what is fix status and what was last
GNSS fix time.
 Satellites information: how many and what type of satellites are visible. How many
satellites are used for location positioning.
 Location information: latitude, longitude, altitude, angle, HDOP, PDOP and speed.
In GSM Info user can see:
36