Odometer - Teltonika FMB1YX User Manual

 Harsh acceleration
 Harsh braking
 Harsh cornering
 Over-speeding (count only events with value 1 (start) and ignore value 0(end))
 Excessive Idling (count only events with value 1 (start) and ignore value 0(end))
 High RPM
Eco score value can be from 10 (excellent) to 0.00 (very bad):
 Excellent 8.00 – 10
 Good 6.00 – 7.99
 Not Good 4.00 – 5.99
 Bad 2.00 – 3.99
 Very Bad 0.00 – 1.99
Score evaluation is calculated like this:
Eco score =10/ ((Total events)/ (Trip distance in km* Allowed events per km))
Allowed events per km = (Eco Score allowed events /100)
equal to 10.
can have only two values: 0 (when total events > 0) or 10 (when total
events = 0).
duration.
Remember iButton functionality. If Remember iButton ID while trip detected and Trip
parameters are enabled, ignition is on and iButton is attached, then FMB1YX remembers iButton
ID. iButton ID is saved and sent to server with every record. If new iButton is attached during the
trip, FMB1YX remembers new iButton ID. FMB1YX forgets iButton ID after ignition is off and trip
ignition off timeout is reached.

5.15.3 Odometer

Calculation Source – choose odometer calculation source of GNSS, OBD or LVCAN.
Note: when Total events < 1, we ignore formula and then Eco score is
If Eco Score allowed events is configured to 0, then Eco score value
Note: Score is updated every 1km driven or 5 minutes of trip
Figure 39 Advanced Trip configuration
61