Over Speeding; Jamming - Teltonika FMB1YX User Manual

5.9.2

Over Speeding

When vecicle speed exeeds configured max speed value scenario is activated, record will
be generated and digital output status will be changed to 1 (if configured).
Scenario is activated until current speed decreases below parameter value.
Figure 23 Over Speeding configuration parameters for FMB120 and FMB122
5.9.3

Jamming

When jamming is detected scenario is activated, record will be generated and digital
output status will be changed to 1 (if configured).
Jamming timeout time can be
configures. After Jamming trigger
count configured timeout (in seconds),
digital output control and jamming
event will be generated after this
timeout. If Jamming ends during
timeout counting no event will be
generated and output will not be
controlled.
You can configure eventual
records parameter:
disabled scenario status value will be
appeared in each AVL record, and
when he is enabled scenario status
value will be appended only to
eventual records.
1
FMB125 don't have DOUT 2 selection
2
FMB125 don't have DOUT 2 selection
when he is
Figure 24 Jamming configuration parameters for FMB120 and FMB122
1
2
51