Teltonika FMB1YX User Manual page 102

8.1.13 setdigout
Sets digital outputs to ON or OFF state (timeout is valid only when DOUT state is changing
from OFF to ON)
Example: 'setdigout 01 30 60' will set DOUT1 to low level (for infinite time) and DOUT2 to high
level for 60 seconds,
'setdigout 11' will set DOUT1 and DOUT2 to high level for infinite time.
FMB125 have only one digital output, so only one DOUT must be described in command.
Example: 'setdigout 1 60' will set DOUT1 to high level for 60 seconds.
8.1.14 battery
Response details
BatState Battery connected (1) or disconnected (0) from device
FSMState Current battery state
ChargerIC Battery charging status
ExtV External Voltage
BatV Battery voltage
BatI Battery charging current
Example: "BatState: 1 FSMState: ACTIVE ChargerIC: OFF ExtV: 11796 BatV: 3942 BatI: 0".
8.1.15 fc_reset
Reset GPS fuel consumption value.
Example: "Fuel Consumption parameters reseted".
8.1.16 towingreact
Reactivates Towing Detection to initial state (does not wait for ignition to be OFF). Useful
when generated false Towing event and needs reactivation.
8.1.17 odoset:#
Set new total odometer value in km.
Example: "Saved Odometer Value: 5000 km".
8.1.18 odoget
Get total odometer value in km.
Example: "Current Odometer Value:5000 km".
8.1.19 btgetlist #
btgetlist command
btgetlist 0; device will respond with BT_LIST_Discovered
btgetlist 1; device will respond with all paired devices
btgetlist 2; device will respond with connected blutetooth device
In FW 01.00.23 btgetlist (without args) will not respond (as unknown
command).
Description
needs argument
Note: Without argument it is always 0 i.e BT_LIST_Discovered
what list should be printed!
102