Teltonika FMB1YX User Manual page 94

Property Name
7.6 Send data with 0, if ignition is off
Depending on LV-CAN200 / ALL-CAN300 I/O parameters and ignition status, FMB1YX can
send locked (last known) LV-CAN200 / ALL-CAN300 I/O parameters values, reset values (set to 0)
and active (real time) parameters values. When ignition is off, LV-CAN200 / ALL-CAN300 I/O
parameters values sent to server are:
Size,
Bytes
0x5X – limit #5: 15 min before optional warning
0x6X – limit #6: optional warning 2 reached
LV-CAN200 / ALL-CAN300 I/O
element
Vehicle Speed
Accelerator pedal position
Total fuel used
Fuel level (liters)
Engine RPM
Total mileage
Fuel level (proc.)
Program number
Module ID
Engine Work Time
Engine Work Time (counted)
Total Mileage (counted)
Fuel Consumed (counted)
Fuel Rate
AdBlue Level (percent)
AdBlue Level (liters)
Engine Load
Engine Temperature
Axle 1 Load
Axle 2 Load
Axle 3 Load
Axle 4 Load
Axle 5 Load
Control State Flags
Agricultural Machinery Flags
Harvesting Time
Area of Harvest
Mowing Efficiency
Grain Mown Volume
Grain Moisture
Harvesting Drum RPM
Gap Under Harvesting Drum
Security State Flags
Value bitmasks
Status
reset
reset
lock
lock
reset
lock
lock
lock
lock
lock
lock
lock
lock
reset
lock
lock
reset
active
lock
lock
lock
lock
lock
active
active
lock
reset
active
active
active
reset
active
active
94