Teltonika FMB1YX User Manual page 69

 Launch FMB Configurator and connect to device as shown in Figure 45 below.
Figure 45 FMB1YX configurator connected devices window
 After successful connection to device wait few moments while device load current
configuration, then go to Bluetooth section that visible at Figure 46.
Figure 46 1- Bluetooth settings; 2 - Enable Bluetooth; 3 - Bluetooth local name; 4 - Bluetooth
security mode; 5 - OBD II connection mode; 6 - External OBD II Bluetooth device name; 7 - Authorized
Devices MAC List; 8 - Save device configuratio
69