Teltonika FMB1YX User Manual page 98

Command
lvcangetprog
lvcangetinfo
lvcanclear #
allcanmode
lvcanmode
lvcanfaultcodes
Parameter ID consists of 3 or 5 digits. Detailed list of parameters and IDs can be found in
chapter 7 PARAMETER LIST.
Example: 'username password setparam 2001:wap' will change configured APN.
Example: 'username password setparam
configured APN name, APN username and APN password. SMS command of limited to 160
characters.
Example: 'username password setdigout 10 60' will set digital output ON for 60s.
8.1.1 getinfo
Response details
RTC RTC Time
Init Device initialization time
UpTime Total up time (in seconds)
PWR Last restart reason
RST Total restarts count
GPS GPS receiver state. 0 – OFF, 1 – ON without fix, 2 – ON with fix, 3 – In sleep
mode.
SAT Average satellites
TTFF Time To First Fix
TTLF Time To Last Fix
NOGPS How much time no GPS fix (h:min)
SR Number of Sent Records
FG Failed GPRS counter
FL Failed link counter
SMS Sent SMS Counter
REC Records Found – number of records in the memory.
MD Data Mode state. 0 – Home and Stop, 1 – Home and Moving, 2 – Roaming
and Stop, 3 – Roaming and Moving, 4 – Unknown and Stop, 5 – Unknown
and Moving
Description
# - 0 or 1 (0 – don't add start byte, 1 – add start byte).
Get program number from LV-CAN200/ ALL-CAN300
that is connected to FMB1YX.
Get information about connected LV-CAN200/ ALL-
CAN300
Clear Total Mileage (counted), Engine Work Time
(counted), Fuel Consumed (counted) parameters
values.
# - parameter (0 – Engine work time (counted), 1 –
Fuel Consumed (counted), 2 – Vehicle Mileage
(counted)).
Turn on ALL-CAN300 mode
Turn on LV-CAN200 mode
Read DTC fault codes
2001:wap;2002:user;2003:pass' will change
Description
Response
Yes
Yes
Yes
Yes
Yes
Yes
98