Auto Geofence; Manual Geofence; Ibutton List; Configuration - Teltonika FMB1YX User Manual

While working as slave mode - Bluetooth can accept incoming connection from external
device.
NOTE: FMB1YX supports ONE connection at a time.
NOTE: FMB001 can see up to 10 available devices. If there are more then
10, with each scanning the list may change.
4.7

Auto Geofence

Auto Geofencing feature if enabled is activated automatically by turning off car ignition.
Next time before driving user has to disable Auto Geofencing with iButton, digital input, by
external voltage or by car Engine RPM. In case of theft car leaves Auto Geofencing zone without
authorization FMB1YX device automatically sends record to AVL application and SMS (if
configurated).
4.8

Manual Geofence

Geofencing is another feature which is highly customizable and can detect wherever car
enters or leaves customized areas. More about Geofencing can be read in 5.13 chapter.
4.9

iButton list

iButton list is used to enter authorized iButton ID codes, which are used to authenticate
driver in Authorized driving and Auto Geofencing options.

5 CONFIGURATION

5.1

Configurator

FMB1YX module has default factory settings. Settings should be changed according to your
application and your GSM operator information.
FMB1YX configuration may be performed via SMS commands or configurator.
FMB1YX has one user editable profile.
It can be configured to acquire and send data to server. If device is not able to send data to
server, GSM is not available FMB1YX will start storing records to flash memory. It is possible to
store up to 192 000 data records with 128 Mb SD memory card (when 100 Mb are used for store
records). It will send data later when GPRS is available again. Note that FMB1YX can have
memory full of records. In such case it will start deleting oldest records in order to save new
ones. Sending all data records to server may take some time.
FMB1YX configuration is performed via FMB1YX Configurator program. Contact sales
manager to get the latest FMB1YX Configurator version. FMB1YX configurator operates on
Microsoft Windows OS and uses MS .NET Framework. For Windows XP you will need MS .NET
Framework 4 (with MS .NET Framework 4 update KB2468871-v2) for Windows Vista, Windows 7,
Windows 8.1, Windows 10 MS .NET Framework 4.6.2 or later. Please ensure that suitable MS
.NET Framework version for your OS is installed on your PC before starting configurator. Latest
MS .Net Framework version can be downloaded from official Microsoft web page.
Module configuration is performed over USB cable or Bluetooth port. Configuration
process starts from starting FMB1YX Configurator program and then connecting to FMB1YX
34