Geofence Zone #1 Shape (Id=1030); Geofence Zone #1 Priority (Id=1031); Geofence Zone #1 Generate Event (Id=1032); Geofence Zone #1 Longitude (X1) (Id=1033) - Teltonika FM1000 ST User Manual

Minimum Maximum
value value
0 1000000

9.6.28 Geofence Zone #1 Shape (ID=1030)

Geofence shape parameter can be: circle – value 0; rectangle – value 1.
Minimum Maximum
value value
0 1

9.6.29 Geofence Zone #1 Priority (ID=1031)

Parameter defines Geofence priority: 0 is low, 1 – high, 2 – panic.
Minimum Maximum
value value
0 2

9.6.30 Geofence Zone #1 Generate Event (ID=1032)

Generate event on:
a) No event – value 0;
b) On entering zone – value 1;
c) On exiting zone – value 2;
d) On both – value 3.
Minimum Maximum
value value
0 3

9.6.31 Geofence Zone #1 Longitude (X1) (ID=1033)

Parameter has two meanings dependent on zone shape. If shape is a rectangle, then
ID=10333 is left down corner X coordinate. If shape is a circle, then ID=1033 is center of that
circle X coordinate.
Sample value: 25.30528.
Minimum Maximum
value value
-180 180

9.6.32 Geofence Zone #1 Latitude (Y1) (ID=1034)

Parameter has two meanings dependent on zone shape. If shape is a rectangle, then
ID=1034 is left down corner Y coordinate. If shape is a circle, then ID=1034 is center of that circle
Y coordinate.
Minimum Maximum
value value
-90 90
Recommended
value
1000
Recommended Goes with (depends on)
value
-
All Geofencing parameters
Recommended Goes with (depends on)
value
-
All Geofencing parameters
Recommended Goes with (depends on)
value
-
All Geofencing parameters
Recommended Goes with (depends on)
value
- All Geofencing parameters
Recommended Goes with (depends on)
value
-
All Geofencing parameters
Goes with (depends on)
parameters
All Geofencing parameters
parameters
parameters
parameters
parameters
parameters
Value
type
U32
Value
type
U8
Value
type
U8
Value
type
U8
Value
type
Float
Value
type
Float
74