Trip \ Odometer; Trip Settings - Teltonika FMB1YX User Manual

Generate event (On entrance, On exit, On Both) – choose when record will be generated.
Eventual records – when disabled scenario status value will be appeared in each AVL
record, and when enabled scenario status value will be appended only to eventual records.
OverSpeeding – in each geozone OverSpeeding scenario can be configured separately.
Regular OverSpeeding functionality and geozones OverSpeeding funkctionality is working
independently. If digital output control is enabled in regular OverSpeeding scenario, geozones
OverSpeeding scenario controls it too. If device is in more that one geozone and OverSpeeding is
detected in any zone then digital output turns on. Digital output turns off only when
OverSpeeding is not detected anywhere (regular OverSpeeding and geozones OverSpeeding).
X1 – geofence zone left bottom corner X coordinate (longitude);
Y1 – geofence zone left bottom corner Y coordinate (latitude);
X2 or R – geofence zone upper right corner X coordinate (longitude) or radius of circle
when Circular zone is used (radius in meters);
Y2 – geofence zone upper right corner Y coordinate (latitude).

5.15 Trip \ Odometer

5.15.1 Trip settings

Trip window offers user to configure Trip feature. If Trip is enabled configuration of
parameters are enabled.
Figure 36 Geofence configuration
59