Over Speeding Scenario; Jamming Detection; Trip; Accelerometer Scenarios - Teltonika FMB010 User Manual

4.4.2 Over Speeding Scenario.

Helps to prevent from exceeding fixed speed.

4.4.3 Jamming detection

Jamming detection shows when GSM signal jamming occurs.

4.4.4 Trip

Trip customizable feature enables user extended monitoring of performed trips (from
engine start at present location to engine stop at arrived location), log their start and stop points,
view driven total distance
Note: Scenarios and Trip feature are activated only if DIN1=1 (ignition is on).
4.5

Accelerometer scenarios

4.5.1 Towing Detection

Towing detection scenario helps to inform driver about car deporting. FMB010 generates
event when car is being towed or raised, for example in case of vehicle evacuation.
FMB010 activates towing function when these conditions are met:
• Ignition (configured Ignition Source) is OFF
• Activation Timeout (set in Towing detection features) is reached
When Activation Timeout is reached and Ignition is still in OFF state, FMB010 monitors
accelerometer data. If Acceleration or Angle value reaches configured threshold for configured
Duration (in ms), check Ignition state. If Ignition is still OFF during configured "Ignition check after
Event Timeout" time, then event is generated. If configured - sends sms event or makes a call.
Function will be reactivated after FMB010 again detects change of Ignition state from ON
to OFF.

4.5.2 Unplug Detection

Unplug detection Scenario generates event when FMB010 is unplugged from OBD socket.

4.5.3 Crash Detection

If Crash detection is enabled, it monitors acceleration on each axis, if acceleration exceeds
configured value for longer then configured duration, event with value "1" is generated.
3
Continuous odometer – total driven distance, works only in TRIP mode. Continues distance is counted only
for ONE trip. If trip is finnished (stop point is detected), odometer resets to 0 (zero). Next trip will start counting
from the begining.
3
.
20