Table of Contents
Advertisement
5.9.2 Over Speeding
This feature is used to prevent the driver from exceeding fixed speed and inspects the
driver if needed. When vehicle speed exceeds maximum configured speed value the scenario is
activated, and a record is generated. Scenario is activated until speed value decreases below the
set parameter value.
5.9.3 ManDown
This feature gets current accelerometer data and calculates angles between offset
positions. Currently there are two positions: horizontal (when GPS antenna is in horizontal
position facing the sky) and vertical. Scanning is performed each second. When calculated angle
exceeds configured angle for 3 seconds, an event is generated with configured priority and an
SMS event takes place, if it is configured. When angle returns to allowed position, an event with
the same priority is generated, an SMS can be sent and a call can be performed, if it is
configured.
Figure 17 Over Speeding parameters
Figure 18 ManDown parameters
36
Advertisement
Table of Contents
