Over Speeding; Excessive Idling; Jamming Detection; Trip - Teltonika FMT100 User Manual

Tracking terminal with gnss and gsm
Hide thumbs Also See for FMT100:
Table of Contents

Advertisement

Note: Green Driving Scenario is a factor on various cars and various drivers
testing phase and can be subject to changes. Teltonika is constantly working
on improvement of the functionality of the devices, and strongly recommends
using the latest version of the firmware.
4.4.2
Helps to prevent from exceeding fixed speed and inspects driver if needed.
4.4.3
Informs you if your vehicle is stationary but engine is on for selected period of time to help
you to save fuel
4.4.4
Shows when GSM signal jamming occurs.
4.4.5
Enables user extended monitoring of performed trips (from engine start at present location
to engine stop at arrived location), log their start and stop points, view driven total distance
Event will be generated (included into send records) only when trip starts and finishes.
4.5

Accelerometer scenarios

4.5.1
Helps to inform driver about car moving with ignition off. FMT100 generates event when
car is being towed or raised, for example in case of vehicle evacuation.
FMT100 activates towing function when these conditions are met:
Ignition (configured Ignition Source) is OFF;
Activation Timeout (set in Towing detection features) is reached.
When Activation Timeout is reached and Ignition is still in OFF state, FMT100 monitors
accelerometer data. If Acceleration or Angle value reaches configured threshold for configured
Duration (in milliseconds), check Ignition state. If Ignition is still OFF during configured "Ignition
check after Event Timeout" time, then event is generated. If configured - sends SMS event or
makes a call.
Function will be reactivated after FMT100 again detects change of Ignition state from ON
to OFF.
4.5.2
Generates event when FMT100 is unplugged from external voltage source.
3
Continuous odometer – total driven distance, works only in TRIP mode. Continues distance is counted only
for ONE trip. If trip is finnished (stop point is detected), odometer resets to 0 (zero). Next trip will start counting
from the begining.

Over Speeding

Excessive Idling

Jamming Detection

Trip

Towing Detection

Unplug Detection

3
.
18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents