Oce Eco Solvent CS9350 Manual page 111

CS9350 OPERATION MANUAL
Dist.Adj menu
Sets up various settings on the media feed compensation.
Setup item
PF
(1) Initial Print menu
Performs Initial Adjust Print.
Setup item
FeedLength
Setting
Initial Print
Init.Adj.Change
Confirm Print
Micro Print
Micro Adj.Change
—
Setting
100mm to <250mm> to
500mm
—
5-111
Description
Performs initial adjustment printing.
•[Enter] key: shifts to the sub menu.
(1) Initial Print menu
Sets up Initial Adjust Change.
•[Enter] key: shifts to the sub menu.
(2) Init.Adj.Change menu
Performs Confirm Print.
•[Enter] key: shifts to the sub menu.
(3) Confirm Print menu
Performs Micro Adjustment Print.
•[Enter] key: shifts to the sub menu.
(4) Micro Print menu
Sets up Micro Adjustment Change.
•[Enter] key: shifts to the sub menu.
(5) Micro Adj.Change menu
•[Cancel] key: shifts to the previous menu.
5.1.1.1 User Type menu
Description
Changes the length (feed length) of the media feed direction
for Initial Print.
•[Enter] key:
Determines the setting.
"Printing" is displayed on the operation panel and Initial
Print starts.
After printing, the printer enters Normal.
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.4 Dist.Adj menu