Nozzle Check - Oce Eco Solvent CS9350 Manual

• Start performing Test Print for the selected item.
TIP
Refer to the following for details on each of the print list items.

3.5.1 Nozzle check to 3.5.3 Setup print
Step 6:
Repeat step 4 to step 5 when performing test print for other items.
Step 7:
Press the [Cancel] key on the operation panel to exit from test print.
• The operation panel returns to Normal.
• The procedure for test printing is complete.
3.3.1

Nozzle check

NOTE
If the nozzle check result indicates that the checked points are blurred or missing, clean

the head. 6.2.3 Head cleaning
Perform the nozzle check once again at the end of the work.
TIP
Refer to the following for printing procedure.

3.5 Test print
3-40
CS9350 User's Guide