TIP
Refer to the following for setting media.
3.4.2 Setting Roll Media
Step 2:
Press the [+] key or [-] key to select the user type setting.
Step 3:
Press the [Enter] key on the operation panel.
•
The user type setting is set.
•
"Media initial" is displayed on the operation panel and media initialization starts.
NOTE
If the following operations are performed in the user type setting menu, the printer starts
media initial operation without specifying a user-defined setting.
Pressing the [Cancel] key on the operation panel.
No keys on the operation panel are pressed for ten seconds.
•
After media initial operation is complete, "Ready to Print" is displayed on the operation panel
and the display shifts to Normal.
3-36
CS9350 User's Guide