NOTE
Perform rough adjustment first when the amount of misalignment cannot be judged.
Step 3:
Print the confirmation pattern and check if the printer is adjusted properly.
3.6.1.1 Standard Confirmation Pattern
Step 4:
If the printer is not adjusted, go back to Step 2.
NOTE
When you are not satisfied with the result of rough adjustment, perform micro
adjustment.
Standard Confirmation Pattern
Print the confirmation pattern for the print mode in the user type setting which is currently set.
Step 1:
Turn ON the printer and load the roll media.
Step 2:
Display the Adjust Print menu on the operation panel.
a. Press the [Menu] key on the operation panel.
•
"Menu1: Setup>" is displayed on the operation panel.
•
The operation panel shifts to the Setup menu display.
3.4.2 Setting Roll Media
3-44
CS9350 User's Guide