Oce Eco Solvent CS9350 Manual page 153

CS9350 User's Guide
Step 8:
Press the tab of the cutter lightly, return the cutter holder to its initial position.
NOTE
Do not press the tab of the cutter strongly or suddenly let go of it. There is a spring in the

cutter holder and it may fly out.
Do not push the cutter all the way in. The cutter blade may damage the inside of the

printer.
Refer to the illustrations below and install the cutter holder correctly. If it is not installed

correctly, it may cause an error. If an error occurs, check if the cutter holder is installed
correctly.
N°
1 Cutter holder
2 Cutter holder lever
Step 9:
Close Maintenance cover.
N°
1 Maintenance cover
1
Name
Name
6-153
2