Oce Eco Solvent CS9350 Manual page 106

Print Mode menu
Settings for print quality (Print Mode) are set according to the usage of print data or print speed.
Setup item
Mode
NOTE
The colours of the image may become irregular depending on the media and print mode

you are using. In such a case, use the following mode to improve irregular colours.
When using the print mode for bidirectional printing (refer to the following chart ""Details

of Print Mode"), switch to the print mode for unidirectional printing.
When using Graphics 1 to 2, change it to Quality 1 to 4.

Setting
Quality 1
Quality 2
Quality 3
Quality 4
Graphics 1
<Graphics 2>
Graphics 3
Graphics 4
Banner 1
Banner 2
Banner 3
Banner 4
—
5-106
CS9350 OPERATION MANUAL
Description
Set the print mode.
•Quality 1 to 4:
Suitable for printing photographs.
Set this when high quality print is required.
•Graphics 1 to 2:
Suitable for printing photographs.
Set this when standard print quality is required.
•Graphics 3 to 4:
Suitable for printing illustrations.
Set this when standard print quality is required.
•Banner 1 to 4:
Suitable for printing outdoor signs or test printing.
Set this when fast printing is required.
While pressing the [>] key, the details of each print mode is
displayed.
Details of Print Mode
•[Enter] key: saves the setting and shifts to the sub menu.
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type menu