CS9350 User's Guide
N°
Name
8
Platen
9
Maintenance cover
10
Connector
2.2.2
Rear section
9
N°
Name
1
AC inlet
2
Network interface cable
connector
3
Scroller holder
4
Media feed slot
5
Ink cartridge slot
6
Media guide
7
Waste fluid tank
Installed inside of the front cover. Stabilizes the print side of the media.
Used to prevent the user from touching the inner mechanical section.
Open and close in the following cases.
•When cleaning the cleaning wiper
•When cleaning around the print head.
•When replacing the cutter
It is normally closed.
Used to install spectrophotometer.
Used for connecting the power cable.
Connects a network interface cable.
Set the scroller here when using the roll media.
Used for feeding media.
Insert the ink cartridge.
Used for feeding media smoothly when the media is set or printed.
Used for collecting waste ink discharged from the printer.
2-21
Function
Function