Oce Eco Solvent CS9350 Manual page 115

CS9350 OPERATION MANUAL
Dryer menu
Sets the temperature of the dryer.
Set to dry the print side after printing.
NOTE
The set temperature of the dryer differs depending on the media.

Setup item
Dryer
Vacuum Fan menu
Sets up vacuum fan operation.
Setup item
Vacuum Fan
Setting
Off / <30 °C> to 50 °C
—
Setting
Low
Middle
<High>
—
5-115
Description
Sets the temperature of the dryer.
2 3
1.Roll media
2.Dryer
3.Print head
•[Enter] key: saves the setting and shifts to the previous menu.
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type menu
Description
Set when there is a possibility of a paper jam caused by failure
in media loading when the setting is Middle.
Set this when there is a possibility that media feeding may fail
and paper may be jammed with the High setting.
Set when using general media.
•[Enter] key: saves the setting and shifts to the previous menu.
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type menu
1