Replacing Cutter - Oce Eco Solvent CS9350 Manual

CS9350 User's Guide
6.1.3

Replacing Cutter

(1) Replacement time
Replace the cutter when the following situation occurs.
a. When the paper is not cut smoothly
b. When the cut surface is feathered, etc
(2) Type
Please refer to our media guide on
(3) Replacing steps
Step 1:
If the printer is turned ON, make sure the following.
• Printing or other operations are not in progress.
• The operation panel display is Normal.
Step 2:
Display the CR Maintenance menu on the operation panel.
a. Press the [Menu] key on the operation panel.
• "Menu 1: Setup>" is displayed on the operation panel.
• The operation panel shifts to the Setup menu display.
b. Press the [>] key on the operation panel.
www.mediaguide.oce.com
6-149