Printing-Related Troubleshooting - Oce Eco Solvent CS9350 Manual

CS9350 User's Guide
(4) Media jams frequently occur
NOTE
If media other than the recommended one is used, correct media feeding cannot be

assured.
N° Possible cause
1 Are you using the recommended media?
2 Is the media used in an environment other
than the one specified?
3 Are you using the old media?
4 Are you using the folded or wrinkled media?
5 Does the media bend?
(5) The media veers during printing
N° Possible cause
1 Are you using the recommended media?
2 Is the loading position of the media correct?
3 Is the scroller set correctly?
7.1.4

Printing-related troubleshooting

(1) Printing is partially stained or incomplete
NOTE
Proper print quality may not be obtained with the media other than the recommended one.

N° Possible cause
1 Does the media include moisture?
2 Are you using the folded or wrinkled media?
3 Does the media bend?
Remedy
Use the recommended media.
Use the media in a dedicated environment.
Replace it with new media.
Use the recommended media.
When using media other than the dedicated
one, set the Vacuum Fan menu.
Remedy
Use the recommended media.
Set the media correctly.
Set the scroller correctly.
Remedy
Replace it with new media.
Use the recommended media.
When using media other than the dedicated
one, set the Vacuum Fan menu.
7-181
Reference
4.2.1 Media type
4.2.2 Cautions
on handling media
6.1.2 Replacing
Roll Media
4.2.1 Media type
5.1.1.1.8
Vacuum Fan menu
Reference
4.2.1 Media type
3.4 Loading
media
3.4.1 Loading
roll media
Reference
6.1.2 Replacing
Roll Media
4.2.1 Media type
5.1.1.1.8
Vacuum Fan menu