CS9350 OPERATION MANUAL
5.1.13
Strike Wait menu
Sets up the waiting time while overwrite printing.
NOTE
When using the media with a narrow width, the media cannot be warmed up adequately,
therefore the print quality may not be preserved.
In such a case, set up the Strike Wait time while overwrite printing to warm up the media
adequately before printing.
Setup item
Strike Wait
5.1.14
Slant Check menu
Sets up slanting detection during media loading.
Setup item
Slant Check
Setting
<0.0 sec.> to 0.1 sec. to 5.0
sec.
—
Setting
Off
<On>
—
5-125
Description
Sets the overwrite wait time.
•[Enter] key: saves the setting and shifts to the previous menu.
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Description
Slant Check is not performed.
Slant Check is performed.
•[Enter] key: saves the setting and shifts to the previous menu.
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu