•
"Set1: User Type" is displayed on the operation panel.
c. Press the [+] key or [–] key to select "Set20: CR Maintenance".
d. Press the [Enter] key on the operation panel.
•
"CR Mainte.: Start" is displayed on the operation panel.
•
The display enters the CR Maintenance menu.
5.1.19 CR Maintenance menu
Step 3:
Press the [Enter] key on the operation panel.
Maintenance starts.
The print head moves to the left of the printer (cutter replacement position).
"CR Maintenance: End" is displayed on the operation panel.
6-150
CS9350 User's Guide