5.1.8
Origin menu
Set the menu when reprinting on the margin with changing the printing data position to the printed
media.
NOTE
When Output Mode menu is set to "Take-up", the set value X (media feeding distance)
becomes 0 mm to 15000 mm.
Depending on the set value of the side margin, the maximum set value of Y (print head
transferring distance) decreases.
Setup
Setting
item
Origin
•X (media feeding
distance):
-15000 to 15000
mm
•Y (print head
transferring
distance):
0 mm to 1151 mm
Confirm Position ->
Enter
—
5.1.6 Output Mode menu
5.1.3 Side Margin menu
Change the print head position and media feeding distance with the following keys.
•[>] : Decreases the print head transferring distance
•[<] : Increases the print head transferring distance
•[+] : Increase the media feeding distance.
•[–] : Decrease the media feeding distance.
1
1. Starting position
2. Media feeding direction
3. Setting position of "Origin menu"
X (media feeding distance) / Y (print head transferring distance)
a (0mm/5mm: The spitting setting is On, Off/On Media)
b (5mm to 25mm: Side margin setting amount)
NOTE
Depending on the setting, the right margin is a sum of:
"Y (print head transferring distance) of the Origin menu" +
"5mm (when the spitting setting is "On Media")" + "value
set on side margin menu"
5.1.2 Spitting menu and
•[Enter] key: "Moving Origin Pos." is displayed and the print head moves to the starting
position.
•[Enter] key or after a certain period of time: Determines the setting. Print head returns
to the original position. Save the setting and shift to the previous menu.
Setup menu
•[Cancel] key: cancels the setting and shifts to the previous menu.
5-122
CS9350 OPERATION MANUAL
Description
X
3
0
b
a
Y
5.1.3 Side Margin menu
2
5.1
5.1 Setup menu