CS9350 OPERATION MANUAL
Setup item
Slant Check
Auto Cleaning
Ink Status
Roll Length
Longstore
CR Maintenance
Initialization
Life Times
IP Address
Subnet Mask
Gateway
Temporary
—
Sets up slanting detection during media loading.
•[Enter] key: shifts to the sub menu.
5.1.14 Slant Check menu
Sets up the time for auto cleaning during standby, before printing, and during printing.
•[Enter] key: shifts to the sub menu.
5.1.15 Auto Cleaning menu
Displays the various information (ink status) about ink cartridges that are installed in the slots
and information about Smart/C.
•[Enter] key: shifts to the sub menu.
5.1.16 Ink Status menu
Sets up the roll media length.
•[Enter] key: shifts to the sub menu.
5.1.17 Roll Length menu
Wash the print head with the cleaning fluid.
•[Enter] key: shifts to the sub menu.
5.1.18 Longstore menu
Performs maintenance.
•[Enter] key: shifts to the sub menu.
5.1.19 CR Maintenance menu
Returns the settings of the printer to default.
•[Enter] key: shifts to the sub menu.
5.1.20 Initialization menu
Displays the operational life time of each part.
•[Enter] key: shifts to the sub menu.
5.1.21 Life Times menu
Sets the IP address of the printer.
•[Enter] key: shifts to the sub menu.
5.1.22 IP Address menu
Sets the subnet mask of the printer.
•[Enter] key: shifts to the sub menu.
5.1.23 Subnet Mask menu
Sets the gateway.
•[Enter] key: shifts to the sub menu.
5.1.24 Gateway menu
Displays the settings of "Off" or "ALL Off" in the Selection menu in the Setup menu
temporarily.
•[Enter] key: returns to the previous menu with all set up items displayed.
•[Cancel] key: returns to the previous status in the Selection menu when the Setup menu is
displayed.
5.4 Menu Option menu
•[Cancel] key: shifts to the previous menu.
5 Panel setup menu
5-103
Description