Step 12:
Press the release buttons on both sides of spectrophotometer, install it to the connector at the
print head.
1
N°
1
2
3
4
NOTE
Make sure that spectrophotometer is NOT installed at an angle, and that there in no gap
between the connector and spectrophotometer.
Step 13:
Press the [Enter] key.
•
The printer checks the connection between the printer and spectrophotometer.
•
"Close front cover" is displayed on the operation panel.
1
2
Name
Spectrophotometer
Release buttons
Print head section
Connector
4-94
CS9350 User's Guide
3
4