Oce Eco Solvent CS9350 Manual page 110

Standard Adjust Print Menu
Adjusts only the print mode in the user type setting which is currently set.
Setup item
Standard
Custom Adjust Print Menu
All patterns from A to F can be adjusted.
By performing this adjustment, all print modes will be adjusted.
Setup item
Custom
Setting
Standard Confirmation
Pattern
Standard Rough Adjustment
Pattern
Standard Micro Adjustment
Pattern
—
Setting
Custom Confirmation Pattern Print the confirmation patterns A to F for print adjustment.
Custom Rough Adjustment
Pattern
Adjust Pattern ALL
Adjust Pattern A
Adjust Pattern B
Adjust Pattern C
Adjust Pattern D
Adjust Pattern E
Adjust Pattern F
—
5-110
CS9350 OPERATION MANUAL
Description
Print the test pattern for the alignment.
Check before adjusting.
3.6.1.1 Standard Confirmation Pattern
Perform this adjustment when the misalignment is big.
Print adjustment patterns and enter the set values.
3.6.1.2 Standard Rough Adjustment Pattern
Perform this adjustment when the misalignment is small.
Print adjustment patterns and enter the set values.
3.6.1.3 Standard Micro Adjustment Pattern
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.3 Adjust Print menu
Description
Check before adjusting.
3.6.2.1 Custom Confirmation Pattern
Perform this adjustment when the misalignment is big.
Print the confirmation patterns A to F and enter the set value.
3.6.2.2 Custom Rough Adjustment Pattern
Perform this adjustment when the misalignment is small.
Print the confirmation patterns A to F and enter the set value.
3.6.2.3.1 Adj. PatternALL
When the misalignment is small, select and print one of the
adjust patterns A to F and register the set value.
3.6.2.3.2 Each Adjust Patterns
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.3 Adjust Print menu