CS9350 User's Guide
Step 3:
Press the [Enter] key on the operation panel.
•
The printer starts printing a rough adjustment pattern.
•
The pattern images are printed on both paper edges and the centre of the media.
Step 4:
Check the both ends and the centre of the print result that printed with Adjust pattern, and
select the number from 1 to 11 that is not out of alignment.
•
"4" is selected in the next printing sample.
NOTE
Note•"6" is the current setting value.
Step 5:
"Pattern *: 6" (* indicates a pattern name as shown below) is displayed on the operation
panel.
•
The pattern name (*) differs depending on the set print mode.
The print modes and their pattern names are as follows.
PrintMode
Quality 1, 2
Quality 3, 4
Graphics 1, 2
Graphics 3, 4
Banner 1, 2
Banner 3, 4
PatternName
C
B
E
D
A
A
3-49