NOTE
To start printing during warming up, press the [Enter] key while "Warming Up Skip -> E" is
displayed.
4.4.7 Start Printing during Warm up
•
A rough adjustment pattern for print quality adjustment is printed after warming up.
•
The pattern images are printed on both paper edges and the centre of the media.
•
Six rough adjustment patterns will be printed. Input setting value for each pattern.
Step 4:
Check the both ends and the centre of the print result that printed with Adjust pattern, and
select the number from 1 to 11 that is not out of alignment.
•
"3" is selected in the next printing sample of "Micro Adjustment Pattern A".
•
"5" is selected in the next printing sample of "Micro Adjustment Pattern B".
•
"4" is selected in the next printing sample of "Micro Adjustment Pattern F".
3-60
CS9350 User's Guide