Data Input; Input Format 1 - KERN FES 17K-4 Operating Instructions Manual

21.5 Data input

• Data entries cannot be processed by the scale if it is performing an
action during the entry (e.g. making settings, zeroing, taring)
• Data can only be entered via the bidirectional RS232C interface (see
chapter 21.1).
• When entering data, pay attention to upper-case and lower-case
letters
Replies:
A00/Exx Format
A00: Normal answer
E01: Incorrect answer

21.5.1 Input format 1

Input format:
1 2 3 4
C1 C2 CR LF
Example of permanent output input:
 Input: O0
Zeroing / taring, data output:
C1 C2 Code (C1)
T Sp 54H
Z Sp 5AH
O 0 4FH
O 1 4FH
4FH
O 2
O 3 4FH
4FH
O 4
4FH
O 5
O 6 4FH
4FH
O 7
O 8 4FH
O 9 4FH
O A 4FH
O B 4FH
*Sp = space
TFES_TFEJ-BA-e-2210
Response
ACK: Normal answer
NAK: Incorrect answer
Code (C2)
20H Set to zero/taring
20H Zeroing
30H End output
31H Permanent output
32H Continuous output only for stable values
(interruption of output for unstable
values).
33H Press [PRINT] key for one-time output
34H Automatic output when weighing plate is
loaded again and value is stable
35H One-time output whenever value is stable
(no output for unstable values)
Continuous output for unstable values
(interruption of output when value is
36H
stable → stable value is output once)
37H Press [PRINT] key for one-time output at
stable values (No output at unstable
values)
38H Single output
39H One-time output at stable value
41H Interval output
42H Interval output for stable values
ACK/NAK Format
Significance
88