15 PRE-TARE
If the tare weight is already known, it can be subtracted from the weight value of the
material to be weighed in advance. Up to five tare values can be stored on the scale.
If the scale is switched off, the PRE-TARE mode is deactivated the next
time the scale is started.
The tare value can be registered in two different ways:
• Actual value setting method: Weighing the reference weight
• Numerical input of the tare value
15.1 Storing PRE-TARE values
51
Press [MENU] key
Use [F1] and [F2] keys to navigate to <3 USER
INFO>.
Press [F4] key to access the settings
Use [F1] and [F2] keys to navigate to <32 PT
INPUT>.
Press [F4] key to access the settings
Use [F1] and [F2] keys to select desired PRE-TARE
memory location
321 PRESET 1
322 PRESET 2
323 PRESET 3
324 PRESET 4
325 PRESET 5
Press [F4] key to confirm selection.
Select which method is to be used to store the PRE-
TARE value:
Memory location 1
Memory location 2
Memory location 3
Memory location 4
Memory location 5
TFES_TFEJ-BA-e-2210