Table of Contents
Advertisement
16.5 Acoustic signal
The acoustic signal supplements the display on the scales and can support you in
your work.
On the scales you can set an acoustic signal to sound in the following cases:
• Piece weight has been updated in the Simple SCS function
• Weight value has been added
• Error message appears
• Low battery charge (for scales with batteries)
• Weight value has been evaluated in the tolerance range during weighing
Setting the acoustic signal in the menu:
57
Use [F1] and [F2] keys to navigate to <1
APPLICATIONS>.
Press [F4] key to go to the application settings.
Navigate to <18 BARGRAPH> using the [F1] to
[F4] keys.
Press the [F4] key
Use [F1] and [F2] keys to select desired setting
OFF
Disabled
ON
Show bar graph
Press [F4] key to confirm selection.
Use [F1] and [F2] keys to navigate to <1
APPLICATIONS>.
Press [F4] key to go to the application settings.
Use [F1] to [F4] keys to navigate to <19 BUZZER>.
Press the [F4] key
Use [F1] and [F2] keys to select desired setting
OFF
Disabled
MODE 1
Acoustic signal activated
Press [F4] key to confirm selection.
TFES_TFEJ-BA-e-2210
Advertisement
Table of Contents
