Simple Scs (Self Counting System); Enabling / Disabling Simple Scs; Using Simple Scs - KERN FES 17K-4 Operating Instructions Manual

16.10 Simple SCS (Self Counting System)

Simple SCS allows you to count pieces even more accurately. If Simple SCS has
been enabled, the average piece weight is automatically adjusted if another
reference sample is placed on the weighing plate when weighing the reference piece
count.

16.10.1 Enabling / disabling Simple SCS

16.10.2 Using Simple SCS

TFES_TFEJ-BA-e-2210
 Navigate to <23 ZERO TRAC> using the [F1] to
[F4] keys.
 Press [F4] key to make settings
 Select the desired setting with [F1] and [F2].
OFF Disabled
0.5 0.5d
1 1d
2 2d
4 4d
 Press [F4] key to confirm selection.
 Use [F1] and [F2] keys to navigate to <1
APPLICATIONS>.
 Press [F4] key to access the settings
 Navigate to <1C SIMPLE SCS> with keys [F1] to
[F4]
 Press [F4] key to make settings
 Select the desired setting with [F1] and [F2]
OFF Disabled
ON Enabled
 Press [F4] key to confirm selection.
 In piece counting mode, select the actual value
setting method and select the reference piece count
(see chapter ).
 When <ON SAMPLE> flashes, apply the reference
piece quantity according to chapter and confirm by
pressing [F4].
 Reference piece quantity on the display starts
flashing
 Place more reference pieces (the number of pieces
60