Table of Contents
Advertisement
While a weighing application is active, up to three functions are shown on the display
- these can be used with the keys [F1] to [F3] below (see following figure).
The [F4] key is used to call the next page on the display. There are four display
pages in total in each weighing application. When displaying e.g. the time, the [F4]
key can be used to return to the measuring mode.
After switching on the scale or leaving the menu, the first page of the display is
shown. The display pages are structured as follows:
• 1. to 3rd page: Functions
• 4. Page: Short commands for weighing applications
9.8 Numeric entry
Tolerance limits, reference weight values, piece weight values, PRE-TARE values,
coefficients, date / time, balance identification number and passwords can be entered
manually on the balance.
• It is not possible to enter "- " for passwords or IDs.
• It is not possible to enter a point for passwords, IDs, time and date.
• Whether it is permissible to enter a point for weight values depends on
the readability of the scale
Example: Readability (d) = 0.1 g → Permissible entry: One decimal
place; Inadmissible input: More than one decimal place
• The balance can display a maximum of eight digits.
Button
Function
Reject input and return to menu
Change polarity ("+" or "-")
A dot is inserted to the right of the flashing digit
31
Function keys [F1] to [F3]
Increase digit by 1 (after „9" starts again with „0")
Decrease digit by 1 (after „1" it starts again with „0")
Functions
TFES_TFEJ-BA-e-2210
Advertisement
Table of Contents
