16.6 Background lighting
The backlight makes the display easier to read.
In the following cases, the backlight is not switched off:
• The scale menu is open
• The material to be weighed is on the weighing plate and the weight
value is unstable
16.7 Stability settings
The stability settings influence the evaluation of weight fluctuations on the weighing
plate and to what extent the weight value is displayed as a stable value.
As a rule: The greater the value set, the greater the weight fluctuations can be
for the weight value to be displayed as stable.
• Full functionality is only available for the FES weighing system.
• Settings 2 and 4 are not available for the FEJ weighing system.
TFES_TFEJ-BA-e-2210
Use
[F1]
and
<1 APPLICATIONS>.
Press [F4] key to go to the application settings.
Navigate to <1A BACKLIGHT> with the keys [F1] to
[F4]
Press [F4] key to make settings
Select the desired setting with [F1] and [F2].
OFF
Disabled
3MIN
Switching off the backlight after 3 min
5MIN
Switching off the backlight after 5 min
10MIN
Switching off the backlight after 10 min
30MIN
Switching off the backlight after 30 min
ON
Backlight always activated
Press [F4] key to confirm selection.
Navigate to <2 PERFORMANCE> using the [F1]
and [F2] keys.
Press [F4] key to access the settings
Use [F1] to [F4] keys to navigate to <21 STABLE>.
Press [F4] key to make settings
Select the desired setting with [F1] and [F2]
[F2]
keys
to
navigate
to
58