Table of Contents
Advertisement
16.8 Reaction settings
The reaction settings allow you to adjust the scale to the environmental conditions.
The reaction settings influence the stability display of the balance.
The following applies: The higher the value set, the less sensitive the scale is to
environmental influences (e.g. wind or vibration) and is more likely to display a
stable weight value.
16.9 Zero-Tracking
Small weight variations (e.g. due to particles on the weighing plate) can be
automatically tared by zero tracking.
Settings 1, 2 and 4 are not available for the FEJ weighing system.
59
0.5
0.5d
1
1.0d
2
2.0d
4
4.0d
Press [F4] key to confirm selection.
Navigate to <2 PERFORMANCE> using the [F1]
and [F2] keys.
Press [F4] key to access the settings
Use the [F1] to [F4] keys to navigate to <22
RESPONSE>.
Press [F4] key to make settings
Select the desired setting with [F1] and [F2].
1
Very strong sensitivity
2
Strong sensitivity
3
Normal
4
Weak sensitivity
5
Very weak sensitivity (anti-vibration)
Press [F4] key to confirm selection.
Navigate to <2 PERFORMANCE> using the [F1]
and [F2] keys.
Press [F4] key to access the settings
TFES_TFEJ-BA-e-2210
Advertisement
Table of Contents
