Other Functions - KERN FES 17K-4 Operating Instructions Manual

12.3 Other functions

The display shows various functions during coefficient multiplication, which can be
called up by pressing the [F1] to [F4] keys:
In the following table you will find short descriptions of these functions.
Function Description
NEXT Turn page / display additional functions
•
Change coefficient: Press the [F3] key
•
CSET
Do not change coefficients: Press the
[F4] key
Toggle display between result calculated
F
and total weight.
ADD Totalize applied sample
TOTL Displaying the total sum
LOW Setting the lower tolerance limit
OK Setting the reference value
HIGH Setting the upper tolerance limit
WEIG Short command: Switch to simple weighing
COUN Short command: Toggle to piece counting
PCNT Short command: Toggle to percent weighing
41
Note
•
Only possible if totalizing has
been activated
•
For more information, see
chapter 14
See chapter 13for more information
on setting the weighing with
tolerance range.
See chapter 16.1 for more
information on setting the short
commands
TFES_TFEJ-BA-e-2210