9.6 Simple weighing
If you use a weighing container, tare before weighing (see chapter 9.3).
9.7 Changing the display and function keys
The balance has three function keys [F1] to [F3]. These keys can be assigned short
commands for weighing applications (assignment see chapter 16.1).
In addition, these keys can be assigned various functions for simple weighing (for
assignment, see chapter 16.2). For the other weighing applications, these functions
are already permanently assigned.
TFES_TFEJ-BA-e-2210
Use [F1] and [F2] keys to navigate to <11 MODE>.
Press [F4] key to go to the application selection
screen
Weighing application is located at the bottom right of
the display and starts flashing
Use [F1] and [F2] keys to select desired weighing
application.
Press [F4] key to confirm selection.
Press [MENU] key to use selected weighing
application.
Select weighing application <WEIG> (for selection,
see chapter 9.5).
Place the weighed material on the weighing plate or
in the weighing container.
Read off weighing result
30