14.2 Set totalizing method
14.3 Using the totalizing function
The totalizing function for simple weighing must first be assigned to a
function key. See Chapter 16.2. for more information on assigning
function keys.
14.3.1 TOTAL-Adding
Totalizing weight values:
49
Navigate to <142 OPERATION> using the [F1] and
[F2] keys.
Press the [F4] key
Use [F1] and [F2] keys to select desired setting
TOTAL
TOTAL-Adding: Totalizing individual weight values
by replacing the sample on the weighing plate
NET
NET-Adding: Totalizing individual weight values
without replacing the samples on the weighing plate
(balance tares automatically after totalizing)
Press [F4] key to save setting
Press [MENU] key to return to the weighing mode
Set balance to <TOTAL> (see chapter 14.2).
Place the first sample on the weighing plate and wait
until the display shows an asterisk <*>.
Press function key which has been assigned with
the totalizing function <ADD> (In this example: [F1]
key)
Wait until the totalizing process is completed and the
measuring mode is displayed again.
Remove sample from weighing plate (balance
performs automatic zeroing)
Place new sample on weighing plate and repeat
steps
TFES_TFEJ-BA-e-2210