17.1.2 Assign passwords
• Only one administrator can be stored on the scale.
• To set users, the scale must be in administrator mode (log in to the
scale: see chapter 17.2)
• <644 SET USER PASS> is only available in administrator mode.
• Up to two users can be set on the scale.
• User passwords are assigned for the user number selected at the
administrator login (see chapter 17.2)
• The password consists of four digits (0 to 9)
• No password can be assigned for guest access
17.2 Logging a user on to the scale
To log in a user, the password control must be activated (see chapter
17.1.1)
TFES_TFEJ-BA-e-2210
Open <64 SCALE MANAGE> (see chapter 17.1).
Navigate to <643 SET ADMIN PASS> or <644 SET
USER PASS> using the [F1] and [F2] keys.
643 SET ADMIN PASS
644 SET USER PASS
Press the [F4] key to enter the password.
Enter password (Numeric entry: See chapter 9.7)
Press the [F4] key to save the password.
Switch on balance
Login prompt for the user appears on the display
Select user mode <USER> or administrator mode
<ADMIN>.
Select user mode:
The scale starts by selecting a user
Select the number of the desired user with the [F1]
to [F3] keys.
0
Guest
1
User 1
2
User 2
Password for administrator
Password for user
64