Table of Contents
Advertisement
14 Totalizing
The Totalizing application allows you to weigh different samples and totalize the
weight values. This function can be used for various applications, such as weighing
individual batches to determine total stock.
Totalizing is available for the following applications: Weighing, percent
weighing, piece counting and coefficient multiplication.
Totalizing can be done in two ways:
• Totalizing individual weight values by replacing the sample on the weighing
plate: TOTAL-Adding (see chapter 14.3.1)
• Totalizing of single weight values without exchanging the sample on the
weighing plate (balance tares automatically after totalizing): NET-Adding (see
chapter 14.3.2).
The following steps are needed to use the totalizing function:
1. Select function (see chapter 14.1)
2. Set totalizing method (see chapter 14.2).
14.1 Select the Totalizing function
TFES_TFEJ-BA-e-2210
Press [MENU] key
Use
[F1]
and
<1 APPLICATIONS>.
Press [F4] key to go to the application settings.
Navigate to <14 ADDITION> with [F1] and [F2].
Press [F4] key to access the settings
Navigate to <141 ACTIVATE> using the [F1] and
[F2] keys.
Press the [F4] key
Use [F1] and [F2] keys to select desired setting
ON
Totalizing activated
OFF
Totalizing disabled
Press [F4] key to save setting
[F2]
keys
to
navigate
to
48
Advertisement
Table of Contents
