Data Description - KERN FES 17K-4 Operating Instructions Manual

• 8-digit data format
Consisting of 16 characters, including the end characters (CR= 0DH, LF= 0AH)
1 2 3
P1 D1 D2 D3 D4 D5 D6 D7 D8 D9 U1 U2 S1
Other data (date, time, etc.)
• 6-digit, 7-digit and 8-digit data format.
The end characters (CR= 0DH, LF= 0AH) are attached to the message "M1, M2,
... Mn"
...
1 2
...
M1 M2
• 6-digit and 7-digit CSP data format
Messages „M1, M2, ... MN" are preceded by the device control code (DC2 =
12H); the end characters (CR= 0DH, LF= 0AH) and the device control code (DC4
= 14H) are appended to the messages
1 2 3
DC2 M1 M2
* End characters: CR = paragraph, LF = line

21.3.2 Data description

Presign:
P1 = 1 character
P1 Code
+ 2BH
- 2DH
Numeric data:
D1-D7/D8/D9 Code
0 – 9 30H – 39H
. 2EH
Sp 20H
/ 2FH
*Sp = space
Units:
U1, U2 = 2 characters: To indicate the unit of the numerical data
U1 U2 Code (U1)
Sp G 20H
K G 4BH
C T 43H
83
4 5 6 7
n n+1 n+2
Mn CR LF
...
n+1 n+2 n+3 n+4
...
Mn CR LF DC4
Code (U2)
47H
47H
54H
8 9 10 11
Significance
Data are 0 or positive
Data are negative
Significance
Numbers 0 to 9
0 also used for zero padding
Decimal point (position not fixed)
Separator character inserted to the left of the
non-verification-relevant digit
Significance
Gram
Kilogram
Carat
12 13 14 15 16
S2 CR LF
Symbol
g
kg
ct
TFES_TFEJ-BA-e-2210