17 User administration and access rights
The scale has a user administration function that can be used to define individual
access rights for users at administrator level. User management requires the entry of
an administrator password.
The administrator can use all the functions and has all rights. Only an admin can
manage the users and grant access rights. A user on the other hand may not have
access to all functions. Admins have limited rights, which are set in administrator
mode.
The maximum of users is limited to 2. The scale has a guest access. No password
can be assigned to this access.
Settings on the balance can be made via the menu by pressing the [MENU] key.
• For navigation in the menu see chapter 8.2
• Keep your passwords in a safe place
• Contact the manufacturer if you lose the administrator password.
17.1 User administration
User administration settings are always made in the <64 SCALE MANAGE> menu.
17.1.1 Activate / deactivate password control
Password control does not work until the scale is restarted.
63
Use the [F1] and [F2] keys to navigate to <6
ADMIN/ADJUST>.
Press [F4] key to access the settings
Navigate to <64 SCALE MANAGE> with the [F1]
and [F2] keys.
Press [F4] key to access the settings
Open <64 SCALE MANAGE> (see chapter 17.1).
Navigate to <642 PASSWORD> with the [F1] and
[F2] keys.
Press [F4] key to make settings
Select the desired setting with [F1] and [F2].
OFF
Password control disabled
ON
Password control enabled
Press [F4] key to confirm selection.
TFES_TFEJ-BA-e-2210