Setting The Weighing Unit - KERN FES 17K-4 Operating Instructions Manual

9.4 Setting the weighing unit

The FES and FEJ weighing systems support different weighing units (see chapter
9.4.1).
When the scale is switched on, the unit is displayed the scale was using
when switched off
TFES_TFEJ-BA-e-2210
 Scale performs zeroing
 The display shows the value <0.0 g> and the
symbol <Net>.
 Press [MENU] key
 Use
[F1] and
<1 APPLICATIONS>.
 Press [F4] key to go to the application settings.
 Use the [F1] and [F2] keys to navigate to
<12 UNIT>.
 Press [F4] key to navigate to weighing unit selection
 Weighing unit is located at the bottom right of the
display and starts flashing
 Use [F1] and [F2] keys to select desired weighing
unit.
 Press [F4] key to confirm selection.
 Press [MENU] key to return to the weighing mode.
[F2] keys to navigate to
28