Reminder when adjustment is required:
19.4 Position of the adjustment switches and seal marks
Seal marks (2x)
TFES_TFEJ-BA-e-2210
Open <63 MAINTENANCE> (see chapter 19).
Navigate to <638 ADVICE CAL> with the [F1] and
[F2] keys.
Press [F4] key to make settings
Use [F1] and [F2] to select the desired setting:
OFF
Reminder disabled
NTF
Reminder enabled
Press [F4] key to confirm selection.
When the scale requires a new adjustment, the
display will show the message <PLEASE EXE
CAL>.
Press [F4] to close the message.
Carry out adjustment (see chapter 0)
Seal mark and
adjustment switch
78