12 Coefficient multiplication
The Coefficient multiplication application allows you to multiply the weight of a
sample by a preset value. The result is shown on the display.
This function is only available for the FES weighing system.
12.1 Selecting the coefficient multiplication function
If data on a previous coefficient is available:
If there are no data on a previous coefficient:
12.2 Apply coefficient multiplication
TFES_TFEJ-BA-e-2210
Select weighing mode <MULT> (to select see
chapter 9.5).
Query whether the last coefficient should be used again:
Select the desired setting with [F3] and [F4].
NO
Do not import value
YES
Accept value
Display <PLEASE SET COEFF> appears.
Enter coefficients (Numerical input: see chapter 9.8)
Place sample on the weighing plate
Balance multiplies the weight value of the sample by
the coefficient
Read off weighing result
40